学科分类
/ 25
500 个结果
  • 简介:TheeffectofTi(C,N)onpropertiesoflow-carbonMgO-Cbrickswasinvestigated.Thephasecompositionandthemicrostructureofthematrixoflow-carbonMgO-CbrickcontainingTi(C,N)werestudiedbyXRDandSEManalysistogetherwithEDS.TheresultsshowedthatTi(C,N)distributedinthematrixoflow-carbonMgO-Cbrickuniformlyafterbeingtreatedat1600℃for3hincokepowderbed,andTi(C,N)andMgOformedasolidsolution.Afterthetreatmentat1600℃for3hincokepowderbed,thebulkdensityandcoldcrushingstrengthoflow-carbonMgO-CbrickwithTi(C,N)decreased,andtheapparentporosityandlinearchangerateofspecimensincreased.Theoxidationresistanceoflow-carbonMgO-CbrickwithTi(C,N)wassuperiortothatoflow-carbonMgO-Cbrickwithnoadditives,butinferiortothatoflow-carbonMgO-CbrickwithAlpowder.TheslagresistanceofthespecimenwithTi(C,N)wasexcellentaswell.

  • 标签: MGO-C砖 氧化强度 耐火材料 建筑材料
  • 简介:采用新颖的碳热还原和氮化前驱体法制备TiC,N)晶须,通过X射线衍射仪(XRD)、扫描电子显微镜(SEM)对样品表征分析,结果表明,在1250℃条件下,产物主要相成分是TiC,N)晶须,含有少量的Ni和TiN成分,晶须直径为100~200nm,反应温度低于1250℃时,钛的氧化物还原不充分,而过高的温度也不能促进TiC,N)纳米晶须的形成。

  • 标签: Ti(C N)晶须 碳热还原 前驱体
  • 简介:Al-5Ti-0.5C-8Sr(集体部分,%)主人合金用一个melt反应方法被准备。微观结构和主人合金的合成过程被光显微镜学,X光检查衍射,扫描电子显微镜学和X光检查调查精力散的光谱。结果证明主人合金由组成一(艾尔),TiAl3,TiC,Al4Sr和Al-Ti-Sr分阶段执行。主人合金的合成机制如下:TiAl3通过在K2TiF6和艾尔之间的反应被形成在基础材料的部分融化层融化在850个C粒子与同类地分布式的加强在超声的行动和一张契约下面被变成液体filler在团结以后被获得。体积部分原文如此,在契约的粒子能被改变以铜锌金焊接的温度改变。最大值原文如此,契约材料的粒子体积部分在brazi到达了37%?

  • 标签: 中间合金 合成过程 微观结构 机制 TIAL3 X射线衍射仪
  • 简介:ThesubmicronpowdermixturesofTiC-TiN-WC-Mo-C-Nisinteredat1400℃orbelowinvacuumwerestudiedbyX-raydiffraction(XRD),scanningelectronmicroscopy(SEM)andtransmissionelectronmicroscopy(TEM)analyses.TheresultsshowedthatMo2Cformedat800℃orbelow.BothWCandMo2Cdisappearedat1200℃,andTiNdisappearedat1250℃.Inaddition,thevariationsoflatticeconstantsofthetitaniumcarbonitrideandnickelbinderphasewithsinteringtemperaturewereexperimentallyobtained,andthereasonwasanalyzed.

  • 标签: SUBMICRON CERMET PHASE SINTERING
  • 简介:为了研究球磨转速对机械合金化工艺的影响,首先在恒定不变转速的球磨机和变频调速的球磨机控制条件下,采用机械合金化工艺制成Ti30Fe20C50合金粉末,然后采用冷压烧结技术制备块体材料,分析球磨转速对粉末粒度及材料性能的影响。结果表明:变频调速控制的球磨工艺与不变转速的相比,制成的合金粉末粒度更小,块体材料的致密度和抗压强度更大。

  • 标签: 机械合金化 Ti30Fe20C50合金 变频调速
  • 简介:TheeffectofAl-3Ti-0.2C-5Sr(wt%)grainrefinerontherefiningperformanceandmodificationofA356alloywasinvestigatedusingopticalmicroscope(OM).ThemorphologyandcrystalstructureofternaryAl-Ti-SrphasesinAl-3Ti-0.2C-5Srrefinerwereanalyzedbyscanningelectronmicroscopy(SEM)andtransmissionelectronmicroscopy(TEM).TheresultsshowthattheternaryAl-TiSrphasesinAl-3Ti-0.2C-5SrrefinercanpromotethegrainrefiningefficiencyofA356alloy.TheternaryAl-Ti-Srphasesco-existintwomorphologies,i.e.,blocky-likephaseandsurround-likephase,besides,whichbothhavethesamechemicalcompositionofAl_(34)Ti_3Sr.ThecrystalstructureofAl_(34)Ti_3Srisface-centeredcubic,andthelatticeparameterisdeterminedtobeabout1.52nm.

  • 标签: A356铝合金 透射电子显微镜 细化效果 三元 扫描电子显微镜分析 A356合金
  • 简介:综述了细晶粒TiC,N)基金属陶瓷的研究现状,简要分析了原始粉末粒径、烧结工艺、烧结方法对其性能的影响,介绍了几种新的制备方法,指出必须发展新的制备技术,以充分发挥细晶粒金属陶瓷的优越性。

  • 标签: TI(C N)基金属陶瓷 细晶粒 纳米改性
  • 简介:摘要:铝合金作为当今社会中常见的金属材料之一被广泛的应用在交通、建筑、航空航天、航海、电力、医疗、装饰等各个领域。将晶粒细化剂参入铝合金熔炼,使得铝熔体在凝固过程中获得足够的异质晶核,从而细化金属晶粒的尺寸来提升铝材性能已经成为如今工业生产中最为普遍且经济实用的方法。

  • 标签: 晶粒细化剂 晶粒细化 形核 晶粒
  • 简介:双音多频DTMF(DualToneMulti—Frequency)信号是音频电话中的拔号信号,将DTMF信号的检测集成到含有数字信号处理器(DSP)的系统中,是一项较有价值的实际课题.本文给出在TI公司浮点DSP芯片C6711中的实现方案,通过20个并行的哥兹柔信号滤波器成成功地使双音多频信号检测变得准确、迅速和简单。

  • 标签: 浮点DSP 双音多频信号 TI公司 DTMF 芯片 数字信号处理器(DSP)
  • 简介:Inthispaper,Ni-basedalloycompositecoatingreinforcedbyTi(C,N)particleswasfabricatedonthemildsteelthroughlasercladdingtechnology.Themicrostructureoflasercladdinglayerwasanalyzedbymeansofopticalmicroscopy(OM),X-raydiffraction(XRD)andscanningelectronmicroscopy(SEM).ThewearresistancetestofthecoatingwasevaluatedusinganM-2000tester.TheresultsshowedthattheNi-basedcompositecoatinghadanabilityofrapidsolidificationtoformdendriticcrystalsmicrostructureconsistingofTi(C,N)particulatesuniformlydistributedinthematrix.ItwasfoundthatsomeTi(C,N)particlesaresimilartoberoundinshape,andtheothersareirregular.LasercladdinglayerreinforcedbyTi(C,N)particulateswasfoundtopossessgoodwearresistanceproperty.

  • 标签: 激光镀层 微观结构 磨损行为 镍基合金复合物涂层
  • 简介:研究VC/Cr3C2对Ti(C,N)基金属陶瓷微观组织和力学性能的影响。利用光学显微镜、X射线衍射仪和扫描电镜结合能谱仪研究微观组织。测试横向断裂强度、硬度和断裂韧性等力学性能。结果表明:微观组织中存在"黑芯-灰壳"和"白芯-灰壳"结构;由于添加VC/Cr3C2,硬质相晶粒变细,添加0.75VC/0.25Cr3C2的金属陶瓷晶粒细化最明显;黑芯随着VC添加量的增加而变细,壳随着Cr3C2添加量的减少而变厚;孔隙率随着VC/Cr3C2中VC的量增加而增大;横向断裂强度和硬度均升高,并且均在添加0.25VC/0.75Cr3C2时达到最大值;按适当的VC和Cr3C2添加量比例添加VC/Cr3C2可以有效地使断裂韧性升高,并在添加0.5VC/0.5Cr3C2时取得最大值。

  • 标签: TI(C N)基金属陶瓷 VC CR3C2 微观组织 力学性能
  • 简介:ThehotrollingexperimentinvestigatesintotherelationshipbetweenthemicrostructuresandthemechanicalpropertiesofNb-TimicroalloyedsteelswithvariousTicontents.TheresultsindicatethattheeffectofthebainitefractionofNb-TimicroalloyedsteelsontheyieldstrengthofthesteelsisnotrelatedtoTicontent,whiletheslopeoftheHall-PetchrelationshipdecreaseswiththeincreaseofTicontent.Accordingly,theMisramodelfortheyieldstrengthofNb-Timicroalloyedsteelsismodified,andthefactorswhichcausethechangeintheslopeofHall-Petchrelationshiparediscussed.

  • 标签: 微合金化钢 屈服强度 钛含量 铌钛 力学性能 微观组织
  • 简介:ThemorphologiesevolutionofvarioustypesofinclusionsinTi-IFsteelwereobservedbyaspecialdeptherosionmethod,andtheformationandevolutionprocesswerediscussed.TheresultsshowedthatthemaininclusionswereFeO·xMnObeforeAldeoxidizationandtheratioofintegratedoxygenandfreeoxygenwasinrangedof0.3to0.4.Inpresentstudy,themaineffectfactorsonthemorphologiesofAl2O3inclusionswere[Al]/[O]Free(solublealuminumdividefreeoxygen)andinitialfreeoxygen;clusterAl2O3wasformedeasilywithhighfreeoxygen([O]Free)andlow[Al]/[O](blew3inpresentstudy).Otherwise,thedendriticAl2O3wasformed;coral-likeAl2O3wasthemixtureofthedendriteAl2O3andsphericalAl2O3.SomeAl2O3·TiOxinclusionsappearedbecauseahigh[Ti]concentrationregionexistedaround70TiFe(containing70percenttitanium)particlesafter70TiFeaddition.ThemaximumsizesofAl2O3reached800μmwhen3minaluminumwasadded;asthetimepast,thelargesizeAl2O3decreasedsignificantly;themaximumsizeofAl2O3wasblew100μmand50μmincalmingsampleandtundishsamplerespectively.

  • 标签:
  • 简介:MicrostructuralevolutionofinfraredvacuumbrazedCP-TiusingtwoTi-basedbrazealloys,Ti-15Cu-15NiandTi-15Cu-25Ni,hasbeeninvestigated.TheinfraredbrazedjointconsistedofeutecticTi2Cu/Ti2NiintermetalliccompoundsandTi-richmatrix.TheeutecticTi2Cu/Ti2Niintermetalliccompoundsdisappearedfromthejointafterbeingannealedat900Cfor1h.Incontrast,thedepletionrateofbothCuandNifromthebrazealloyintoCP-Tisubstrateat750Cannealingwasgreatlydecreasedascomparedwiththatannealedat900C.BlockyTi2Cu/Ti2Niphaseswereobservedevenifthespecimenwasannealedat750Cfor15h.BecausetheNicontentoftheTi-15Cu-25NibrazealloyismuchhigherthanthatoftheTi-15Cu-15Nialloy,theamountofeutecticTi2Cu/Ti2NiphasesinTi-15Cu-25NibrazedjointismorethanthatinTi-15Ci-15Nibrazedjoint.However,similarmicrostructuralevolutioncanbeobtainedfromtheinfraredbrazedjointannealedatvarioustemperaturesand/ortimeforbothfillermetals.

  • 标签: 微观组织演变 真空钎焊 红外线 钛基 铜镍 CP
  • 简介:一“哥哥。”小奕在门口叫了一声,哥哥就欢欢地朝他奔过来。晚饭后,小奕带哥哥去楼下散步。这是小奕一天中最快活的时刻,他们可以在下面玩半小时,然后小奕就要上来画画了。他们来到电梯口,小奕揿了向下的键,电梯上方显示楼层的绿色数字就一跳一跳。从1一下一下地跳上来,哥哥仰着头等待着,快到23了,哥哥激动起来,做好往里冲的准备。小奕家住在23楼。

  • 标签: 哥哥电 电里