首页
期刊导航
期刊检索
论文检索
新闻中心
期刊
期刊
论文
首页
>
《中国焊接:英文版》
>
2015年1期
>
Numerical analysis of keyhole establishment time in keyhole plasma arc welding
Numerical analysis of keyhole establishment time in keyhole plasma arc welding
打印
分享
在线阅读
下载PDF
导出详情
摘要
未填写
DOI
pd5epm8wd7/1522595
作者
孙俊华;胡庆贤
机构地区
不详
出处
《中国焊接:英文版》
2015年1期
关键词
等离子弧焊接
数值分析
时间
小孔
焊接工艺参数
内孔形状
分类
[金属学及工艺][焊接]
出版日期
2015年01月11日(中国期刊网平台首次上网日期,不代表论文的发表时间)
相关文献
1
胡庆贤;武传松.
Analysis of keyhole geometry in plasma arc welding
.焊接,2006-04.
2
雷玉成;谢伟峰;李闯;陈希章.
Numerical analysis of the molten pool vibration mode for arc-ultrasonic keyhole plasma arc welding
.焊接,2012-01.
3
霍玉双;武传松.
Modeling the keyhole shape and dimension in plasma arc welding
.焊接,2009-02.
4
胡庆贤;武传松;张裕明.
Experimental determination of the weld penetration evolution in keyhole plasma arc welding
.焊接,2007-01.
5
贾传宝;武传松;张裕明.
A computer-based control system for keyhole plasma arc welding
.焊接,2007-04.
6
董春林;吴林;张慧;朱轶峰;邵亦陈.
Front side keyhole detection in plasma arc welding of stainless steel
.焊接,1999-02.
7
张国凯;武传松;刘新锋;张晨.
Simultaneous observation of keyhole and weld pool in plasma arc welding with a single cost-effective sensor
.焊接,2014-04.
8
孙俊华;武传松.
Numerical analysis of weld pool geometry in pulsed current plasma arc welding
.焊接,2010-03.
9
霍玉双;武传松.
Determining the keyhole geometry based on double-elliptic distribution of plasma arc pressure
.焊接,2009-03.
10
秦国梁;齐秀堃;林尚扬.
Critical power of keyhole formation in CW Nd:YAG laser deep penetration welding
.焊接,2007-01.
来源期刊
中国焊接:英文版
2015年1期
相关推荐
3D Numerical Analysis of the Arc Plasma Behavior in a Submerged DC Electric Arc Furnace for the Production of Fused MgO
Image processing of weld pool and keyhole in Nd:YAG laser welding based on edge predicting
Characteristic Analysis of AC Plasma Arc in Water
Numerical investigations of arc behaviour in gas metal arc welding using ANSYS CFX
Numerical simulation of gas metal arc welding temperature field
同分类资源
更多
[焊接]
Alterative wire-feed system based on arc voltage negative feedback
[焊接]
Stress distribution at diffusion-bonded interface of Fe3Al with Crl8-Ni8 steel
[焊接]
Influence of Mn on wettability and microstructure of low-silver lead-free solders
[焊接]
Development of high frequency pulse power source using two powers for TIG welding
[焊接]
南通振康提倡“自强、创新、求实、奋进”的企业理念
相关关键词
等离子弧焊接
数值分析
时间
小孔
焊接工艺参数
内孔形状
返回顶部