学科分类
/ 3
45 个结果
  • 简介:WestudiedthespatialevolutionoftheFe-Niplasmageneratedbythefundamental(1064nm)andsecond(532nm)harmonicsofaQ-switchedNd:YAGlaser.Theexperimentallyobservedlineprofilesoftheneutraliron(FeI)havebeenusedtoextracttheplasmatemperature(Te)usingtheBoltzmannplotmethod,whereastheelectronnumberdensity(Ne)hasbeendeter-minedfromtheStarkbroadening.Inaddition,westudiedthespatialbehaviorofTeandNewiththevariationoflaserenergyforironplasmabyplacingthetargetmaterial(iron-nickelalloy)inairatatmosphericpressureforbothmodesoftheNd:YAGlaser.

  • 标签: ND YAG激光 等离子体温度 铁镍合金 32纳米 谐波产生
  • 简介:TheballmillingofFe-24MnandFe-24Mn-6Simixedpowdershasbeenperformedbythehighenergyballmillingtechnique.ByemployingX-raydiffractionandMoessbauermeasurements.Theccmpositionevolutionduringthemillingprocesshasbeeninvestigated.TheresultsindicatetheformationofparamagneticFe-MnorFe-Mn-Sialloyswithametastablefccphaseasfinalproducts.whichimplythattheFeandMnproceedaco-diffusionmeenanismthroughthesurfaceoffragmentedpowders.Thethermalstabilityandcompositionevolutionoftheas-milledalloyswerediscussedcomparingwiththebulkalloy,.

  • 标签: 合金 FE-MN FE-MN-SI 穆斯鲍尔效应
  • 简介:TheNi-AlalloycontainingCr,FeadditiveswerepreparedasRaneyNiCatalystbyhighenergymilling.ThesizeandsurfacestateofNi-Alalloypowderwerestudiedbyparticlesizeanalyzerandsanningelectronmicroscopy.theStructurewasanalyzedbyXRDandMoessbauermethods.Theresultsshowedthatafterahigh-energymilling(HEM).theNi-Alalloytransformstoanano-scaleNiAlstructurewithrichAl.Byannealingthealloy,ametastableNi2Al3phasecanbeobtained.

  • 标签: 催化剂 催化剂镍 纳米晶体
  • 简介:本文采用溶胶-凝胶法,获得了铁掺杂的纳米TiO2样品,XRD和透射电镜测量表明在600℃以下焙烧时为锐钛矿,颗粒度在10nm以下,样品在1000℃下焙烧时,转变为金红石相,颖粒度增大。EXAPS和穆谱表明,铁的确掺杂到TiO2晶格内,表现为3价。铁的掺杂改变了纯的TiO2的性质,对于锐铁矿相的掺铁纳米TiO2,其紫外-可见反射光谱给出在481nm处出观了新的吸收峰,;对于以金红石相为主的掺铁纳米TiO2,其紫外-可见反射光谱在512nm处出现了新的吸收峰。

  • 标签: FE 纳米Ti02 结构 二氧化钛 掺杂
  • 简介:通过水热法合成了骨架含铁的杂原子丝光沸石,采用XRD,FT-IR及TPR等表征技术确认铁进入了分子筛骨架。利用XAFS技术对分子筛中铁的精细结构和配位环境进行了表征和计算,近边吸收的Fe-K边前跃迁证实铁在分子筛骨架中位于四面体配位环境中,与邻近原子存在共价键作用;铁-氧配位键长为0.188-0.189nm.

  • 标签: 表征 硅铁分子筛 丝光沸石 XAFS 结构 催化剂
  • 简介:TherearetwotpyesofphasetransformationsinFe-MnandFe-Mn-Sialloyswhenthetemperatureisdecreased,γ(fcc)→ε(hcp)martensitictransformation(MT)andparamagnetic-antiferromagnetictransition(AMT)ofγphase.Fromthethermodynamicpointofview,theformerusuallyappearsinaslightlyhighertemperaturerangethanthelatterbecauseifisgenerallyacceptedthatthemagnetictansitionhasasuppressingeffectonthethermallyinducedεmartensite(Satoetal.,1984.,BogachevandZvigintzeva,1976;Murakamietal.,1987:Yangetal.,1992)GartsteinandRobinkin(1979)eventhoughtthattheγ-εtransformationshouldbeterminatedbelowNeeltemperature(TN)duetothedecreaseoffreeenergyarisingfromtheAMTofγphase.However,someexperimentalresultshaeindicatedtheformationofεphasebelowT(LiandWayman,1994:Fujimori.1966).Inthepresentwert.thebehavorofγ-εtransformationbelowTNwasfurtherinvestigatedbyclectricalresistancemeasurements.

  • 标签: 相变 FE-MN-SI合金 γ(fcc)-ε(hcp)
  • 简介:Inordertotransfertheheatfromthearmortothecoolant,tungstenhastobeconnectedwithacopperheatsink.Thejointtechnologyisthemostcriticalissueformanufacturingplasmafacingcomponents.Consequently,thereliabilityofthejointsshouldbeverifiedbyagreatnumberofhigh-heat-flux(HHF)teststosimulatetherealloadconditions.W/CubrazedjointtechnologywithsliverfreefillermetalCuMnNihasbeendevelopedatSouthwesternInstituteofPhysics(SWIP).Screeningandthermalfatiguetestsofonesmall-scaleflattileW/CuCrZrmockupwereperformedona60kWelectron-beamMaterialtestingscenario(EMS-60)constructedrecentlyatSWIP.Themodulesuccessfullysurvivedscreeningtestwiththeabsorbedpowerdensity(Pabs)of2MW/m2to10MW/m2andthefollowing1000cyclesatPabsof7.2MW/m2withouthotspotsandoverheatingzonesduringthewholetestcampaign.MetallurgyandSEMobservationsdidnotfindanycracksatbothsidesandtheinterface,indicatingagoodbondingofWandCuCrZralloy.Inaddition,finiteelementsimulationsbyANSYS12.0underexperimentalloadconditionswereperformedandcomparedwithexperimentalresults.

  • 标签: 铜散热器 钎焊技术 高热流密度 样机 热疲劳试验 铬锆铜合金
  • 简介:Inthisstudy,tungsten(W)wascoatedonacopper(Cu)substratebyusingdouble-glowdischargetechniqueusingapureWpanelasthetargetandargon(Ar)asthedischargeandsputteringgas.ThecrystalstructureoftheWcoatingwasexaminedbyX-raydiffraction(XRD).Scanningelectronmicroscopy(SEM)wasperformedwithcross-sectionimagestoinvestigatethepenetrationdepthofWintotheCubody.Additionally,thepropertiesofwearabilityresistance,corrosionresistanceandmechanicalstrengthoftheWcoatedCumatrixwerealsomeasured.Itisconcludedthatindouble-glowplasma,WcoatedCucanbefacilelyprepared.ItisnoticedthatthetreatmenttemperatureheavilydominatesthepropertiesoftheW-Cucomposite.

  • 标签: 辉光离子 钨涂层 电铜 W-CU复合材料 扫描电子显微镜 表征
  • 简介:本文利用XAFS方法研究机械合金化方法制备的Fe100-xCux(x=0,10,20,40,60,70,80,100,x为原子百分比)合金中Fe、Cu原子的局域环境结构随组成的变化。对于Fe100-xCux二元混合物,当x≥40时,Fe原子的近邻配位结构从bcc转变为fcc,但Cu原子的近邻结构保持其fcc不变;与之相反,当x≤20时,Fe原子的近邻配位保持bcc结构而Cu原子的近邻配位结构从fcc转变为bcc结构。XAFS结果还表明fcc结构的Fe100-xCux中Fe的无序因子σ(0.009A)比bcc结构的Fe100-xCux中的σ(0.081A)大得多;并且在同一机械合金化Fe100-xCux(x≥40)样品中Fe原子的σ(0.099A)比Cu原子的σ(0.089A)大。这表明机械合金化的Fe100-xCux样品中Fe和Cu原子可以有相同的局域结构环境但不是均匀的过饱和固溶体,而是fcc或bcc合金相同时存在Fe富集区和Cu富集区。

  • 标签: 局域环境结构 XAFS Fe100-xCux合金 机械合金化 铁铜合金
  • 简介:采用XAFS研究不同制备条件下超细Ni-P非晶态合金中Ni原子配位环境周围的局域结构。结果表明在pH小于11的条件下,样品的非晶化程度随pH的减小而增大;当pH为14时,样品中Ni的区域环境结构与金属Ni的相近。不同退火温度样品的XAFS结果表明,在300℃的温度下退火,超细Ni-P非晶态合金基本晶化生成晶态物相。

  • 标签: XAFS 化学还原法 超细Ni-P非晶态合金 镍磷合金 催化剂 局域结构
  • 简介:采用EXAFS详细研究了系列Ni-Co-B非晶态合金催化剂的结构,结果表明:非晶态Ni-Co-B合金中的金属和非金属之间是一种共价化学键,Co的加入增加了Ni-B非晶态合金的无序度,而B含量的变化对Co-B、Ni-B配位有不同的影响,当样品中Ni、Co含量相同时,存在着协同作用。

  • 标签: Ni-Co-B合金 非晶态合金催化剂 EXAFS 协同作用 结构
  • 简介:Chemicalvapordeposition-tungsten(CVD-W)coatingcoveringthesurfaceoftheplasmafacingcomponent(PFC)isaneffectivemethodtoimplementthetungstenmaterialasplasmafacingmaterial(PFM)infusiondevices.ResidualthermalstressinCVD-Wcoatingduetothermalmismatchbetweencoatingandsubstratewassuccessfullysimulatedbyusingafiniteelementmethod(ANSYS10.0code).Thedepositionparametriceffects,i.e.,coatingthicknessanddepositiontemperature,andinterlayerwereinvestigatedtogetadescriptionoftheresidualthermalstressintheCVD-Wcoating-substratesystem.AndtheinfluenceofthesubstratematerialsonthegenerationofresidualthermalstressintheCVD-WcoatingwasanalyzedwithrespecttotheCVD-WcoatingapplicationasPFM.ThisanalysisisbeneficialforthepreparationandapplicationofCVD-Wcoating.

  • 标签: 面向等离子体材料 残余热应力 表面涂层 热应力分析 面对等离子体材料 化学气相沉积
  • 简介:采用XAPS和XRD研究Ni-Ce-B超细非晶态合金在退火过程中的结构变化。实验结果表明,在573K的返火温度下,样品仍然保持非晶态结构,仅有少量晶态Ni3B生成;在673K退火温度下、Ni-Ce-B样品晶化生成晶态Ni3B和纳米晶Ni;在773K和更高的温度退火处理后,还有一部分Ni3B并未分解,少量的Ce掺杂使得样品晶化生成的Ni晶格有较大畸变。说明0.3%的Ce对提高Ni-Ce-B样品的稳定性有显著作用。

  • 标签: Ni-Ce-B超细非晶态合金 结构 XAFS 催化活性 催化剂 镍铈硼合金