简介:随着汽车轻量化设计的要求不断提高,高强度钢板材料占汽车车身的比重越来越大。用一般冲压方法生产出的高强度钢零件回弹值会非常大,回弹后的零件形状往往不在误差允许范围控制内。本文即通过两个实例,并根据实际零件成型后的检测数据,结合回弹补偿的实践经验,应用ThinkDesign的GSM功能做冲压件的回弹补偿。
简介:本文重点介绍开发高导热高耐热CEM-3覆铜板的技术背景、技术路线和技术成果。
简介:3层PE外防腐作业线,即能生产FBE、3PE、2PE、2PP的多功能涂敷作业线。技术水平高,科技含量较大,在我们设计出国产第一条生产线之前全都是进口作业线,投资相当昂贵。但我公司根据多年来设计的多条环氧粉末喷涂作业线的经验和PE侧向挤出的一些经验,又结合进口作业线,即国外同类作业线的技术参数进行分析,比较。根据国情认为有能力进行生产线设计。所以,国产第一条3PE生产作业线就从我们这里开始设计,选型配套,制造出一条全部国产化的3PE生产作业线,而且投资是进口的三分之一,性能和技术参数方面达到国外同类作业线水平,并稳定地、高质量地完成FBE、3PE近1500km管线的防腐施工任务。这里关于3PE多功能防腐作业线,如何设计及选型进行总结,供大家参考。
简介:BasedonthetechniqueforpreparingLaCl3viadirectpyrolysisofrareearthchloridesolution,ajetpyrolysisreactorwasdesignedandtheintra-reactortemperatureandchemicalreactionswerenumericallysimulatedusingcomputationalfluiddynamics(CFD)technique.Theresultsshowthattheflowratevariationatthefuelinletdoesnotlargelyaffectthetemperatureinthereactor,whiletheincreaseinexternalpressureatthematerialinletrapidlydecreasestheaveragetemperature,Venturitemperature,andoutlettemperature.TheCH4andO2insidethereactorarecombustedcompletely,andwhenthematerialinletpressureis\90Pa,theLaCl3isfullypyrogenated.ThecontentsofCO2,La2O3,andHClfluctuateneartheVenturitubeandfinallystabilize.La2O3contentattheoutletisinatop-to-bottomgradient.
简介:Thecorrosionbehaviorandanti-corrosionmechanismoftheZn-Ni-Al2O3compositecoatingwereinvestigatedbySEM,EDSandXPS.TheresultsindicatethatthecorrosiontypeoftheZn-Ni-Al2O3coatingsinneutral5wt.%NaClsolutionisuniformcorrosion.ThepresenceofcompactanduniformlydispersednanoaluminaparticlessubstantiallyinhibitsthecorrosionofZn-Ni-Al2O3compositecoatings.Intheinitialcorrosionstage,thecorrosiveproductsofZn-NimatrixformacompactZnCl2·4Zn(OH)2layer.Withthedevelopmentofcorrosion,somenanoaluminaparticlesareembeddedandformaNienrichmentlayer.InNienrichmentlayer,NipresentsasNiandNiO.
简介:通过微弧氧化法在新型医用近β钛合金Ti-3Zr-2Sn-3Mo-25Nb表面制备一层含Ca、P多孔薄膜,再将其在胺基化溶液中活化处理以在薄膜表面引入NH-2。借助XRD、SEM和EDS研究该多孔复合薄膜的组成和表面形貌,并通过模拟体液浸泡实验、体外细胞培养实验和动物体内植入实验研究经上述表面改性处理后的Ti-3Zr-2Sn-3Mo-25Nb合金的骨诱导活性。结果表明:该薄膜主要由金红石型TiO2和锐钛矿型TiO2组成,是一种含有Ca、P的陶瓷混合物;薄膜在模拟体液中具有很好的生物活性,成骨细胞能够很好地在薄膜上分化、生长;表面覆膜处理的Ti-3Zr-2Sn-3Mo-25Nb合金的体内骨诱导活性优于未处理的Ti-3Zr-2Sn-3Mo-25Nb合金的。
简介:晶体结构和加氢行为(La_(1-x)Mg_x)_3Al(x=0.1,0.2,0.3,和0.4)合金被调查。这被发现有x=的合金0.1La和第0.2consi(Mg,艾尔),La,和一个新奇阶段。新奇阶段作为La_2Al被决定。当Mg满足增加,La_2Al的数量减少,这被显示出。当x增加到0.3时,onlyLa(Mg,艾尔)并且La_2Al的小数量存在。当x是0.4时,La_2Al阶段消失,合金包含两La(Mg,艾尔)并且La(艾尔,Mg)_2洗阶段。(La_(0.9)Mg_(0.1))_3Al并且(La_(0.7)Mg_(0.3))_3Al合金能被氢的吸收在473K分解成LaH_3,MgH_2,和La_2Al_5。
简介:ThedosimetricphosphorsLi_3PO_4:M(M=Tb,Cu)wereproducedbymodifiedsolid-statemethod.ThestructuralandmorphologicalcharacterizationwascarriedoutthroughX-raydiffraction(XRD)andscanningelectronmicroscope(SEM).Additionally,thephotoluminescence(PL),thermoluminescence(TL)andopticallystimulatedluminescence(OSL)propertiesofpowderLi_3PO_4dopedwithTbandCuwerestudied.ItisadvocatedthatLi_3PO_4:CuphosphornotonlyshowshigherOSLsensitivity(25timesormore)butalsogivesfasterdecayinOSLsignalsthanthatofLi_3PO_4:Tb~(3+)phosphor.Theminimumdetectabledose(MDD)ofLi_3PO_4:M(M=Tb,Cu)phosphorsisfoundtobe21.69×10~(-3)and3.33×10~(-6)J·kg~(-1),respectively.InOSLmode,phosphorshowslineardoseresponseintherangeof0.02-20.00J·kg~(-1).InTLmode,sensitivityofLi_3PO_4:CuphosphorismorethanthatofLi_3PO_4:Tbphosphor.Thekineticsparameterssuchasactivationenergyandfrequencyfactorsweredeterminedbypeakshapemethod,andphotoionizationcrosssectionsofpreparedphosphorwerecalculated.